In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
Profile Design's J4 Bracket Kit lets you fine-tune your aero position down to the millimeter. For lightness, strength and aerodynamics, the brackets are made of forged and CNC-machined 6061 aluminum and have Marine-quality 12.9-grade bolts that are corrosion-resistant and hidden. For easy and fast adjustability, by simply loosening the fixing bolt on each side you can slide your extensions in and out. Meanwhile, the brackets hold the armrests set back 20mm from the center of the base bar or you can reverse the armrests for a forward position. You can also stack aftermarket risers on the brackets to raise the armrests (armrests, risers and extensions sold separately).
- Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
$92.00 - $100.00
SRAM X01 Chainring Guards - Material: Polycarbonate - Chainring BCD: 94 - Mount Type: Chainring
Salsa Pivot Service Kits
Salsa Split Pivot Suspension Service Kits, for all 2014+ Horsethief, Pony Rustler, Spearfish, Redpoint and Deadwood Sus frames.
$10.99 - $99.99
Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.
The new CX Single Ring Chain Guide is designed to prevent your chain from dropping off single-ring setups and built strong enough to endure brutal conditions of cyclocross. Specifically designed to be used in combination with SRAM CX1 and other single-ring setups. The lightweight aluminum cage limits lateral movement of the chain, the leading cause of chain derailment, adding high-end K-Edge quality insurance to your CX bike. Key Features and Benefits: - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains Attributes (specs): - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
This assortment of chainring spacers contains 120 pcs. in a clear plastic storage box. Kit includes: - (20) 0.6mm - (20) 1.2mm - (5) 2mm - (5) 3.8mm - (5) 2.2mm - (5) 3mm - (5) 3.5mm - (10) 4mm - (10) 4.3mm - (10) 4.6mm - (10) 5mm - (5) 5.3mm - (5) 7.1mm - (5) 8.3mm
The F40 Armrest was designed in combination with the Aeria Ultimate to offer a massive adjustment range in a simple solution. Creative engineering and design have yielded a strategic offset bolt pattern offering a 67.5mm fore/aft adjustment range at 7.5mm steps between each position and a 92.5mm width adjustment range at 18.5mm steps between each position. Upgrading any of Profile's T+ Carbon Aerobar Systems to the F40 armrest will increase the range of adjustability by 31%, offering 42 unique armrest positions. - Armrest Material: 6061-T6 AL - Armpad Material: EVA Closed Cell Foam - Compatibility: J2/J3/J4/J5/L1/L2/Aeria/Aeria Ultimate - Size: 122mm x 84mm - Stack: 19mm (w/Standard Pad) - Reach Adjustment: 7.5mm Increments - Width Adjustment: 18.5mm - Rotation Adjustment: +/- 7.5 - Weight: 175g
$19.95 - $89.95
Replacement frame parts and hinge clamps for Ritchey Break-Away frames. - 45.0mm Hinge clamp compatible with boom tube of Break-Away Tandem
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Flip-up armrest leaving the base or drop bar clear for riding with your hands on the flat section of the handlebar. - Construction: 6061-T6 Forged Aluminum - Stack Height: 24mm - Width Adjustment: 37mm - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 242g
The forged aluminum bracket offers solid, easy-to-use construction alongside an industry-leading fit range. It is also compatible with our riser kits. The bracket is designed for 31.8mm bars and 22.2mm extensions in aluminum or carbon. - Materials: Forged 6061-T6 AL - Stack Height: 42.6mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 234g
The tool-free Maxle Lite brings exceptional stiffness and durability to your bike's rear end in a light, easiest-to-use expanding wedge thru-axle system.
The new OneLoc remote provides total control over your RockShox fork at your fingertips. The increased leverage at the bar translates in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes and RockShox's Reverb remote.
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
$55.99 - $79.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
Shimano's Dura-Ace Di2 takes shifting to the next level. This amazing technology is powered by this small, light, high-output Lithium Ion battery that delivers reliable, long life even in the worst of conditions. Even while riding terrain that requires lots of shifting, the battery is capable of about 1,250 miles of use before requiring recharging (this takes 90 minutes). The battery includes a mount that easily attaches to the bottle cage bolts on your frame. And, the battery can be removed without tools for charging (charger sold separately).
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
This kit contains all the parts needed for scheduled maintenance and/or rebuild of B1 non-Stealth Reverb Seatposts. - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - Requires RockShox Specialty Tools to perform Service: Post Bleed Tool, Oil Height Tool, IFP Height Tool - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
- 4, 5, & 6mm stainless steel fastener kit - Includes socket cap screws, flat socket cap screws, flat washers, lockwashers, plain nuts, and locking nuts - 218 Pieces Kit contains: - M4 X 8 Socket Head Cap qty. 8 - M4 X 16 Socket Head Cap qty. 8 - M4 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Socket Head Cap qty. 12 - M5 X 10 Socket Head Cap qty. 12 - M5 x 8 Socket Head Cap qty. 12 - M5 X 16 Socket Head Cap qty. 8 - M5 X 16 Button Socket Head qty. 16 - M5 X 25 Socket Head Cap qty. 4 - M5 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Flat Socket Head Cap qty. 8 - M5 X 16 Flat Socket Head Cap qty. 8 - M6 X 20 Socket Head Cap qty. 2 - M6 X 35 Socket Head Cap qty. 2 - M6 X 45 Socket Head Cap qty. 2 - M4 Flat Washer qty. 8 - M5 Hex Nut qty. 20 - M5 Nylock Nut qty. 10 - M5 Flat Washer qty. 20 - M5 Lockwasher qty. 20 - M6 Hex Nut qty. 8 - M6 Nylock Hex Nut qty. 6 - M6 Flat Washer qty. 8 - M6 Lockwasher qty. 8
$57.50 - $72.00
Surly Mr. Whirly Spindles. - 100% CroMoly steel - Proprietary dimensions and spline for use only with Surly Mr. Whirly cranks
Zipp Speed Weaponry Vuka Aero Center Cap Kit - Bolt kit sold separately
$63.90 - $70.00
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.